Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries

Abstract

Reversible extraction of lithium from (triphylite) and insertion of lithium into at 3.5 V vs. lithium at 0.05 mA/cm 2 shows this material to be an excellent candidate for the cathode of a low‐power, rechargeable lithium battery that is inexpensive, nontoxic, and environmentally benign. Electrochemical extraction was limited to ∼0.6 Li/formula unit; but even with this restriction the specific capacity is 100 to 110 mAh/g. Complete extraction of lithium was performed chemically; it gave a new phase, , isostructural with heterosite, . The framework of the ordered olivine is retained with minor displacive adjustments. Nevertheless the insertion/extraction reaction proceeds via a two‐phase process, and a reversible loss in capacity with increasing current density appears to be associated with a diffusion‐limited transfer of lithium across the two‐phase interface. Electrochemical extraction of lithium from isostructural (M = Mn, Co, or Ni) with an electrolyte was not possible; but successful extraction of lithium from was accomplished with maximum oxidation of the occurring at x = 0.5. The couple was oxidized first at 3.5 V followed by oxidation of the couple at 4.1 V vs. lithium. The interactions appear to destabilize the level and stabilize the level so as to make the energy accessible.

Cite this paper

Related papers

1. Preparation of Graphitic Oxide1958
2. The electronic properties of graphene2009
3. Large-Area Synthesis of High-Quality and Uniform Graphene Films on Copper Foils2009
4. Challenges for Rechargeable Li Batteries2009
5. Graphene and Graphene Oxide: Synthesis, Properties, and Applications2010