Nanometre diameter fibres of polymer, produced by electrospinning

Abstract

Electrospinning uses electrical forces to produce polymer fibres with nanometre-scale diameters. Electrospinning occurs when the electrical forces at the surface of a polymer solution or melt overcome the surface tension and cause an electrically charged jet to be ejected. When the jet dries or solidifies, an electrically charged fibre remains. This charged fibre can be directed or accelerated by electrical forces and then collected in sheets or other useful geometrical forms. More than 20 polymers, including polyethylene oxide, nylon, polyimide, DNA, polyaramid, and polyaniline, have been electrospun in our laboratory. Most were spun from solution, although spinning from the melt in vacuum and air was also demonstrated. Electrospinning from polymer melts in a vacuum is advantageous because higher fields and higher temperatures can be used than in air.

Cite this paper

Related papers

1. Piezoelectric Nanogenerators Based on Zinc Oxide Nanowire Arrays2006
2. Hydrogel: Preparation, characterization, and applications: A review2013
3. Materials and Mechanics for Stretchable Electronics2010
4. Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications2019
5. Epidermal Electronics2011